|
Instruction: 
 P series Valve standard type of YINGBO valve used in many aerosol products.
| Mounting cup |
Material: Plain tinplate, E8.4/8.4; 0.27-0.28mm; Coated silk or gold lacquer, Alumnium micoflex. |
| |
With or without dimples. |
| Outer gasket |
Per- Buna 80A |
| Stem |
Material: PA. Hole: 1x0.5mm; 2x0.5mm; 4x0.5mm |
| Inner gasket |
Material: Buna, Neoprene, Butyl |
| Spring |
Material: Stainless steel. |
| Housing |
Material: PA. RTP- 20, 15. VPH- 0.3; 0.5mm |
| Dip tube |
PE |
 K series Valve fast filling design which stem is with dimples.
| Mounting cup |
Material: Plain tinplate,E8.4/8.4; 0.27-0.28mm; Coated silk or gold lacquer; Alumnium micolex |
| |
With or without dimples. |
| Outer gasket |
Per- Buna 80A |
| Stem |
Material: PA. hole- 1x0.5mm; 2x0.5mm; with dimples |
| Inner gasket |
Material: Buna; Neoprene; Butyl |
| Spring |
Material: Stainless steel |
| Housing |
Material: PA, POM. RTP-20,15; VPH- 0.3mm; 0.5mm |
| Dip tube |
PE |
 S series Valve soft press using design,
| Mounting cup |
Plain tinplate, Silk or gold lacquer. Alumniumn micoflex |
| |
With dimple or without dimples |
| Outer gasket |
Per-Buna 80A |
| Stem |
PA. 1x0.5mm; 2x0.5mm. with dimples |
| Inner gasket |
Buna, Neoprene, Butyl |
| Spring |
Stainless steel, 0.4mm |
| Housing |
PA, POM. RTP-15, 20. VPH-0.3mm, 0.5mm |
| Dip tube |
PE |
 F series Valve used for aerosol formula with powder.
| Mounting cup |
Plain tinplate E8.4/8.4 0.27-0.28mm |
| Outer gasket |
Per buna 80A |
| Stem |
PA, |
| Inner gasket |
Buna, Butyl, Neoprene |
| Spring |
Stainless steel |
| Housing |
POM, RTP-20 |
| Dip tube |
PE |
| |
|
 D metering Valve used in spray box metering and timing spray.
| Mounting cup |
Plain tinplate. E8.4/8.4. 0.27-0.28mm |
| Outer gasket |
Per Buna |
| Stem |
PA. |
| Inner gasket |
Buna |
| Spring |
Stainless steel |
| seal gasket |
Buna |
| Housing |
PA, dose 70mcl, 25mcl |
| Dip tube |
PE |
For use of the D metering valve, Kindly attention the size suitable with the spray box. Our valve dimenssion as below:
 R series valve for gas lighter refill.
| Mounting cup |
Plain tinplate E8.4/8.4, 0.27-0.28mm |
| Outer gasket |
Per-Buna |
| Stem |
PA, long size / short size |
| Inner gasket |
Buna |
| Spring |
Stainless steel |
| Housing |
PA. 2 slot |
| |
|
 W series Valve for products use by inverse spray.
| Mounting cup |
Plain tinplate, coated tinplate or Alumniumn, with or without dimples |
| Outer gasket |
Per-Buna |
| Stem |
PA, 1x0.5mm, 2x0.5mm; 4x0.5mm |
| Inner gasket |
Buna, Neoprene, Butyl |
| Spring |
Stainless steel |
| Stainless ball |
stainless |
| Ball housing |
PA |
| Dip tube |
PE |
| |
|
 VBS valve with bag system for the formula separate liquid from the propellent.
|